|
|
|
|
 |
 |
||||
 |
|||||
 |
 |
 |
 |
 |
 |
 |
 |
||||
 |
 |
Airbrush Accessories - Miscellaneous
| Filters & Regulators Medea moisture filters and regulators are essential for optimizing the performance of both the compressor and the airbrush. A high quality 5 micron filter is used to remove any potential moisture particles. Moisture filters attach either directly to the air source or can be placed inline between two air hoses. |
| Airbrush Holders Medea airbrush holders are made of high impact resistant plastic and nickel plated brass. Airbrush holders will hold two of any make or model airbrush securely. Attaches to table top, easel, or workstation; virtually anywhere. Holders have a bracket that can accommodate most air filters and regulators as well. |
| Multiple Valve Assemblies Two and three way valve assemblies are ideal for splitting air from a single air source into multiple gun setups. The valves are leak proof and can be purchased separately for custom setups. |
| 1/4" Threaded Fittings Male and female threaded fittings are used for connecting air hoses, regulators and multiple valve assemblies to your air source. |
| 1/4" Threaded Quick Disconnect Quick Disconnect fittings and adaptors are used for convenient disconnect of air hoses from your air source. |
| Teflon Tape Used for sealing threads on all threaded fittings. |
| Medea Super Lube Natural and non-toxic, Super Lube can be used on all moving parts of an airbrush. Use Super Lube on the main lever, needle packing, and valve piston packing will help keep them moving smoothly. Apply Super Lube in the needle cap along the needle to enhance paint flow and to prevent tip drying. |
| Product description | Item # |
| Filters and Regulators | |
| Moisture Filter (replaces F A100) Moisture Filter with Regulator and Gauge (replaces F A200) Pressure regulator and Gauge (replaces F A300) Regulator Bracket Nut (for F A200 & F A300) Regulator Bracket Mount "L" (for F A200, 300, 600, 700) Regulator Bracket Mount "Flat" (for F A200, 300, 600, 700) |
F A500 F A600 F A700 012 105 012 296 008 008 |
| Multiple Valve Assemblies & Fittings | |
| 1/4" male to male brass fitting 1/4" male to female brass fitting 1/4" female to female brass fitting 1/4" quick disconnect set 1/4" quick disconnect adapter Teflon Tape 1/2" x 260" (1.2cm to 6.5m) On/Off valve 2-way valve assembly 3-way valve assembly |
012 001 012 002 012 013 012 010 012 011 012 012 012 003 012 004 012 005 |
| Airbrush Holders | |
| Iwata Airbrush Holder with regulator bracket Medea Airbrush Holder with regulator bracket |
AH 100 AH 200 |
| HOW-TO Video Tapes | |
| Basic Airbrush Techniques Intermediate Airbrush Technique Air Experience Video with Richard Sturdevant |
VT 100 VT 200 VT 300 |
| Cleaners and Lubricants | |
| 1/2 oz. (14ml) Medea Super Lube 4 oz. (112ml) Medea Ready-To-Use Airbrush Cleaner 8 oz. (224ml) Medea Ready-To-Use Airbrush Cleaner 16 oz. (448ml) Medea Ready-To-Use Airbrush Cleaner 32 oz. (896ml) Medea Ready-To-Use Airbrush Cleaner |
015 001 6 500 04 6 500 8 6 500 16 6 500 32 |
| Iwata 2004 Catalog |
| © 2004 Medea Airbrush Products. All rights reserved. Medea, the Medea logo, Air Medea, Cobra Coil, Com-Art Colours, Medea Airbrush Cleaner, Medea Super Lube, Medea Textile Colours and Straight Shot are trademarks of Medea Airbrush Products. Iwata Custom Micron and Iwata Eclipse are trademarks of Anest Iwata Corporation. Iwata and the Iwata logo are registered trademarks of Anest Iwata Corporation. All other trademarks are the properties of their respective owners. |
 |
 |
 |
 |
||
