
COMPRESSOR MODEL SPECIFICATIONS
| HAMMER HEAD Shark: (item #: SHARK 50) Technical Specifications: HP 1/2 Hp Tank Size 1.5 Gallons CFM 2.15 CFM at open flow Voltage 110V, 60Hz PSI 84 - 114 PSI maximum pressure Shipping Weight 55 lbs Features: Cooling Fan: Unique cooling fan positioned to cool the top of the motor/compressor unit which is were the maximum cooling efficiency happens.Moisture Filter: The highly efficient 5 micron Moisture Filter separates out any water before it gets to your airbrush. Pressure Regulator: The pressure regulator provides accurate pressure settings from 0 - 100 psi allowing the maximum use from your airbrush. Long Power Cord: An extra long (10') and heavy duty power cord allows direct connection into your power receptacle therefore eliminating any overheating problems developed by an undersized extension cord. Wheels: Sturdy wheels allows the compressors to be easily moved within your studio. Uses: T-Shirt Artist: Basic or Non-Production T-Shirt Artist ( 1 user) Fine Artist: Can run all airbrushes Automotive: Custom automotive artist for use an airbrushes Illustrators: For studio set-ups for up to 3 users Taxidermy: Taxidermist artist for use up to 3 users Ceramics: For use with airbrushes up to 3 users. |
![]() |
| Iwata 2003 Catalog |
| © 2004 Medea Airbrush Products. All rights reserved. Medea, the Medea logo, Air Medea, Cobra Coil, Com-Art Colours, Medea Airbrush Cleaner, Medea Super Lube, Medea Textile Colours and Straight Shot are trademarks of Medea Airbrush Products. Iwata Custom Micron and Iwata Eclipse are trademarks of Anest Iwata Corporation. Iwata and the Iwata logo are registered trademarks of Anest Iwata Corporation. All other trademarks are the properties of their respective owners. |